HD CNC Cutting, Great for a wild thickness from 1mm to 15mm


Home workshop

Metal workshops

Light fabrication,

Repair and maintenance

These Materials:

Mild Steel




Input Power:

340V-460V ,3-Phase

Amperage Range: 30-125A

Rated Output at 40℃ (104℉):

125A @ 100% Duty Cycle

Weight: 45KG


Excellent Cutting Performance

Maximum productivity

  • The system offers a 100% duty cycle, can be quickly cut less than 20mm mild steel,and 25mm(1’’) CNC pierce capability, and fast gouging metal removal.
  • Long life consumables

  • Reduce costs with long consumables life and more up time.
  • More reliability and stability

  • Designed with 100% duty cycle for the most demanding production environments.
  • Designed and tested as the TOPWELL PROCUT series product for superior reliability in the most demanding cutting environments.
  • Economic

  • Low maintenance for maximum uptime.
  • General View Of Control Panel

    1.Ammeter/Voltmeter Display

    2.Encoder Control


    Cutting Capacity (Carbon Steel)

    CapacityThickness Cut speed
    Dross free(CNC) 18mm 1000mm/min
    Cut angle(ISO9013) Range 2
    Severance(Hand cutting) 60mm 125mm/min

    *Pierce rating for handheld or with CNC torch height control

    Gouge capacityRemoval rate Groove profile
    Plasma gougingn
    Typical gouge9.8kg/h6.4mm Dx 7.4mm W

    Non-HF Arc Ignition System

    Torch off.

    By pressing the trigger the torch will be fed by the current thus causing a temporary short circuit betweenelectrode and tip.

    The air then pushes up the small piston, thuscreating, between the electrode and the tip, the distance needed to strike the pilot arc

    By positioning the torch on the part to be cut, theplasma arc will strike..

    Torches with pilot arc cut in without high frequency.

    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone and computer systems in the vicinity of the cutting positions. Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage necessary for striking the arc Greater simplicity in comparson with other torches(without high frequency) on the market,with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc. Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing the insulating thicknesses (without endangering the safety parameters).


    Get updates on sales specials and more


    We want to hear from you!

    Copyright © 2010 - 2017 All Rights Reserved